SWITCHBOARD EQUIPMENT

Low-voltage complete devices are designed for receiving and distributing AC voltage of 0.4 kV. These devices are used to automate the work of consumers, protect them from emergency conditions and distribute electrical energy.

OUTDOOR LIGHTING CONTROL CABINET, 1 PHASE

It is designed to work in single-phase networks and is necessary for controlling lighting in settlements, on highways and highways. It provides autonomous operation of electrical installations according to a schedule, can support several work schedules and allows you to get information about its status.

Automatic data collection from electricity metering devices and their further transmission to the control room.

Automatic monitoring of the state and functioning of the control panel, lighting networks and the equipment included in it.

OUTDOOR LIGHTING CONTROL CABINET, 1 PHASES

A device designed for operation in three-phase networks and necessary for controlling lighting in localities, on highways and highways. It provides autonomous operation of electrical installations according to a schedule, can support several work schedules and allows you to get information about its status.Automatic data collection from electricity metering devices and their further transmission to the control room.

Automatic monitoring of the state and functioning of the control panel, lighting networks and the equipment included in it.

INPUT AND DISTRIBUTION DEVICE

Input and distribution devices are designed for receiving, accounting and distributing electrical energy in electrical installations of residential and public buildings, as well as for protecting distribution and group circuits departing from the device in case of overloads and short circuits.

They are used in networks with a voltage of 230/400 V of three-phase alternating current with a frequency of 50 Hz with a dead-earth neutral, to protect lines in case of overloads and short circuits, as well as for infrequent operational switching on and off of electrical networks and usually consists of a grounded metal cabinet of protected design, inside of which there may be appropriate equipment: switches, fuses, electric energy meters, emergency reserve input panels, phase control relays, emergency lighting switch, phase load distribution sensors, voltmeters and ammeters.

On the door of the input and distribution device, an indication of the main parameters of the power grid can be displayed: voltage, current, protection operation, phase asymmetry, etc. Ammeters and energy meters are switched on through current transformers.

CASCADE CONTROL CABINET

A system that performs sequential switching on (off) of sections of the outdoor lighting group network.
It is installed in the head cabinet of the cascade outdoor lighting network and performs the function of controlling and monitoring the power part.

DATA COLLECTION AND PROCESSING CABINET

It is used as part of the “Smart Pedestrian Crossing” system (hereinafter referred to as SCP).
Designed to perform the following functions:

  • Implementation of the SCP algorithm
  • Autonomous mode of operation of the SCP system
  • Automatic data collection from electricity metering devices
  • Monitoring of the condition and functioning of the equipment that is part of the SCP system
  • Automatic transmission of electricity metering data and technical condition of equipment to the control room

VIDEO ANALYTICS CABINET

It is designed for the operation of the video analytics system, analysis and data transmission to the control room. The cabinet includes a mini-PC for performing logical operations, a communication router and a device for protecting and powering video surveillance cameras.